.jpg "3D Nozzle Micro Drill Bit Printer Accessories")
8pc .2mm .3mm .4mm .5mm 3D Printer Extruder Clogged Nozzle Bit Kit Solution
3D printer accessories parts kits 1.75mm 3.0mm filament nozzle backed-up bundle 3D nozzles restore jammed clogged poor print quality solution
THE BITS: (2 each) 0.2mm, 0.3mm,0.4mm, 0.5mm
These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.
Univeral Kit Makerbot MK7 MK8 RepRap Felix 3.0 3.1 for1.75mm PLA ABS Printers
THE BITS: (2 each) 0.2mm, 0.3mm,0.4mm, 0.5mm
These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.
THE NOZZLES: 1each: 0.2mm, 0.3mm, 0.4mm, .5mm
Print HeadforMK7 MK8 makerbot RepRap print nozzle for 1.75mm filament ABS/PLA printers
THE TOOL:
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at3.5" long. Inserting the bit into the tool could not be more easy. The chuck inside the tool is double-sided with a capacity of 0-1/8".
THE TOOL:
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at3.5" long. Inserting the bit into the tool could not be more easy. The chuck inside the tool is double-sided with a capacity of 0-1/8".
| Item Specifics | |
| Brand | daewon industries |
| Country/Region of Manufacture | Japan |
| Model | 8pc2345tool |
| MPN | Does Not Apply |
| Type | Cleaning Kit |
| UPC | 700424793426 |